44473001TH Rev.1
164 /
Oki Data CONFIDENTIAL
6. REGULAR MAINTENANCE
6.6 Cleaning Rollers in the ADF
If the document feeding rollers in the ADF are contaminated with ink, toner particles or
paper dust, documents and outputs get dirty and a paper jam may occur. To prevent this, it is
recommended to clean the rollers once a month.
(1) Thrn off the power of MFP.
(2) Open the ADF cover.
Note! If the rollers get too dirty, wipe them with a soft cloth lightly moistened with
n
eutral detergent, and then wipe it again with a soft cloth lightly moistened with
water..
(
4
) Close the ADF Cover.
(3) Wipe the document feeding rollers with a soft cloth lightly moistened with water.
Wipe the whole surface of the roller and rubber pad while turning it with your hand.
Document feed roller
Rubber Pad
To Next Page
Loading...
