44473001TH Rev.1
61 /
Oki Data CONFIDENTIAL
3. MFP INSTALLATION
3.3 MFP Installation Instructions
•
Install the MFP at a place under the following temperature and humidity:
Ambient Temperature : 10 to 32°C
Ambient Humidity : 20 to 80% relative humidity
Maximum Wet-Bulb Temperature : 25°C
•
Be
careful not to be bedewed.
•
Wh
en the MFP is to be installed at a place where the humidity is less than 30%, use
a humidifier or a static electricity prevention mat.
Installation Space
•
Place the MFP on a flat desk with enough space for the legs of the MFP.
•
Se
cure enough space around the MFP.
Top View
Side View
To Next Page
Loading...
