Oki MC351 User Manual

44473001TH Rev.1
18 /
Oki Data CONFIDENTIAL
1. CONFIGURATION
Items FX750 Supplement
Contrast -3, -2, -1, 0, +1, +2,
+3
Adjusts the difference between the light
and dark areas of an image.
Enables individual RGB adjustments.
Saturation Adjustment -3, -2, -1, 0, +1, +2,
+3
Adjusts the sharpness of an image.
(In Color mode only)
Hue Adjustment -3, -2, -1, 0, +1, +2,
+3
Adjusts the balance between Red and
Green with Yellow in the middle.
(In Color mode only)
RGB Adjustment -3, -2, -1, 0, +1, +2,
+3
(In Color mode only)
Grayscale ON, OFF
File format Color PDF, TIFF, JPEG,
XPS
File format used to save the scanned
images as a file
Mono (Grayscale) PDF, TIFF, JPEG,
XPS
Encrypt PDF is a new function to support.
Mono (2 levels) PDF, TIFF, XPS
ON, OFF With Encrypted PDF set to ON, Setup
Wizard launches enabling to set each
menu item.
Encrypted
PDF
(PDF
document
security)
[New
function]
Encryption level Low (Compatible
with Acrobat4.0 and
later)
Medium (Compatible
with Acrobat5.0 and
later)
High (Compatible
with Acrobat7.0 and
later)
Specifies the level of encryption. The
higher the level, the higher the security.
Encrypted by RC4 (40bit) for Low, RC4
(128bit) for Medium, and AES (128bit) for
High.
Default value is Medium.
Password to open
a document
Not set
Set
Default password set
Sets a password to open created PDF
documents.
Setting from Admin Setting:
* Either “Password to open a document”
or “Access password” must be set. (“Not
set” may not be selected for both.)
Items FX750 Supplement
Set Password /
Re-enter Password
Default value is
NULL
Sets a password to open created PDF
document.
NULL by default.
Characters that can be entered are 1 to 32
alphanumeric characters (Upper-/Lower-
case letters) and no symbols can be used.
This cannot be the same as Access
password.
* Users are prompted to enter twice for
confirmation.
Access Password Not set
Set
Default password set
Sets a password to restrict operations
such as editing and printing created PDF
documents.
* Either “Password to open a document” or
“Access password” must be set. (“Not set”
may not be selected for both.)
Set Password /
Re-enter Password
Default value is
NULL
Sets a password to restrict operations
such as editing and printing created PDF
documents.
NULL by default.
Characters that can be entered are 1 to 32
alphanumeric characters (Upper-/Lower-
case letters) and no symbols can be used.
This cannot be the same as Access
password.
* Users are prompted to enter twice for
confirmation.
Document
Access
Print the
Document
Not allowed
Low resolution
(150dpi)
High resolution
Low Resolution (150dpi) is displayed only
when Encryption Level is other than Low.
Extract
Text and
Graphics
Not allowed Security Options in formatting in PDF:
Extracting texts and graphics
Allowed

Oki MC351 Specifications

General

Brand	Oki
Model	MC351
Category	All in One Printer
Language	English