DMTA-20006-01EN, Rev. B, February 2014
Index
72
installing
probe 22
protective sleeve 23
sleeve clamp 23
instruction manual 3
instrument compatibility 4
interferences, presence of visual 7
introduction 13
L
labels 1
LEMO/DE-15 connector adaptors 62
link
loosening 36
types 17
list, spare parts 58
loom installation tool 20
low-profile phased array probes 14
M
manual
instruction 3
introduction 13
markings, location 1
N
NOTE signal word 9
notes, information signal words 9
O
Olympus technical support 11
OmniScan
configuration 13
MX2, interface connector pinout 63
one-sided scanner configuration 17
operating environment specifications 61
operating the scanner 44
P
part numbers
basic kit 57
ordering 52
spare 58
spare, fittings and tubing 57
performing the inspection 45
phantom spots, presence of 7
pinout, OmniScan MX2 scanner interface con-
nector 63
precautions, safety 9
probe
installing 22
removing 21
replacing 21
specifications 64
probe holder, configuring 31, 39
protective sleeve, installing 23
R
removing
probe 21
sleeve clamp 22
replacing the probe 21
rotating the scanner 45
S
safety
instrument compatibility 7
misuse of instrument 3
precautions 9
signal words 8
symbols 8
scanner
cleaning 47
components 16
exploded view 58
markings, location 1
operating 44
setup chart for larger pipes 66
setup chart for smaller pipes 65
spare parts 58
scanner interface connector, pinout 63
screw driver 20
separating scanner 37
separating the two halves of the scanner 36
serial number 2
location 1
setup chart
for larger pipes 66
for smaller pipes 65
To Next Page
Loading...
