Olympus COBRA - List of Tables

DMTA-20006-01EN, Rev. B, February 2014
List of Tables 69
List of Tables
Table 1 Symbols ..................................................................................................................... 2
Table 2 Ancillary equipment ............................................................................................... 4
Table 3 Standard tube an pipe ODs supported by the setup templates ..................... 19
Table 4 Required tools (included with the scanner) ...................................................... 20
Table 5 Troubleshooting cases ........................................................................................... 48
Table 6 COBRA Scanner ordering part numbers ........................................................... 52
Table 7 Wedge selection chart ........................................................................................... 55
Table 8 Fittings and tubing spare parts list (P/N: COBRA-SP-IRRIGATION) ........... 57
Table 9 COBRA scanner part list ...................................................................................... 59
Table 10 General specifications ........................................................................................... 61
Table 11 Operating environment specifications ............................................................... 62
Table 12 Required encoder cable adaptor ......................................................................... 62
Table 13 OmniScan MX2 pinout for the scanner interface LEMO connector .............. 63
Table 14 Standard phased array probe specifications ..................................................... 64
Table 15 Scanner setup chart for smaller pipes ................................................................ 65
Table 16 Scanner setup chart for larger pipes ................................................................... 66