Points for setting up and setting up
◆ SDI cable used
◆ Setting for CV interface converter
◆ Up-Convert Function of External Imaging Signals
21
This product is capable to output three types of SDI signals:
Depends on the SDI cable wiring, output signal can be limitted
Please check the settting parameter and the cables prepared.
Signals that can be transmitted (CV-
1500 image sets)
12G-SDI
MAJ-2426 12G-SDI cable (1.5M)
4 K, 1080p, 1080i,SD
MAJ-2428 12G-SDI cable (2.9M)
MAJ-2429 12G-SDI cable (8.5M)
3G-SDI
MAJ-2430 3G-SDI cable (1.5M)
1080p, 1080i,SD
MAJ-2015 3G-SDI cable (3.0M)
MAJ-2016 3G-SDI cable (8.5M)
MAJ-1951 SDI cable (2.5M)
1080i,SDMAJ-1912 SDI cable (8.5M)
MAJ-1464 SDI cable (22M)
When connecting a peripheral device with using an interface converter,
configure CV-1500 system setting in the order of "Select the communication
device to connect" > "Select the peripheral device to connect".
If the setting of the connected interface converter is changed, the following
settings will be reset.
When an external image signal is input to CV-1500 and output from CV-
1500, the external image signal is upconverted to output signal type setting
in CV-1500.
To Next Page
Loading...
