Olympus OER-Elite - 4.9 Procedure ID setting

4.9 Procedure ID setting
91
OER-Elite OPERATION MANUAL
Ch.4
When this setting is activated, the procedure ID can be entered before starting reprocessing process
and recorded in the reprocessing record.
4.9 Procedure ID setting
1 Select “Procedure ID” on the Settings menu.
2 Select setting from options.
No. Item/Button Setting options Description
1 Procedure ID
Settings
OFF Disable the procedure ID entry for “Reprocessing” and “Leaking
scope decontamination”.
ON (default) User can enter the procedure ID before starting “Reprocessing”
and “Leaking scope decontamination”.
2 Cancel – Returns to the Setting menu without saving the edited information.
3 Save – Returns to the Setting menu after saving the edited information.
NOTE
The selected settings are displayed with white buttons.
3 Press the “Save” button to save the selected settings.
1
2 3