Olympus OER-Elite - Auto Print Setting

108
4.17 Print option
OER-Elite OPERATION MANUAL
Ch.4

Auto Print Setting
If this setting is activated, Reprocessing result and Leak Testing result will print automatically after the
process is complete.
NOTE
• To print a record, an optional MAJ-2144 printer set is necessary.
• If the printer is not connected to the reprocessor although “Auto Print” is selected,
[E094] error occurs at the completion of reprocessing process, leak test, and
leaking scope decontamination.
1 Select “Auto Print” on the Print option menu.
2 Select setting from options.
No. Item/Button Setting options Description
1 Auto Print Setting OFF (default) Disable the auto printing for “Reprocessing”.
ON Enable the auto printing for “Reprocessing”.
2 Cancel – Returns to the previous screen without saving the selected setting.
3 Save – Returns to the previous screen after saving the selected setting.
NOTE
The selected settings are displayed with white buttons.
3 Press the “Save” button to save the selected setting.
1
2 3