Olympus OER-Elite - 4.20 Volume and brightness

4.20 Volume and brightness
111
OER-Elite OPERATION MANUAL
Ch.4
The buzzer volumes and touch screen brightness can be adjusted. Also, when the panel click sound
setting is activated, a click sound can be generated when a button on the touch screen is pressed.
4.20 Volume and brightness
1 Select “Volume and Brightness” on the Setting menu.
2 Edit the settings.
No. Item/Button Setting options Description
1 Volume 5 steps
(default: 3)
Sets the volume of the buzzer in 5 steps.
Pressing the “+” button increments the setting and pressing the
“–” button decrements it.
2 Brightness 5 steps
(default: 3)
Sets the brightness of the touch screen in 5 steps.
Pressing the “+” button increases the brightness and pressing the
“–” button decreases it.
3 Click Sound ON (default) The click sound is generated when a button on the touch screen is
pressed.
OFF The click sound is not generated even when a button on the touch
screen is pressed.
4 Cancel – Returns to the Setting menu without saving the edited information.
5 Save – Returns to the Setting menu after saving the edited information.
3 Press the “Save” button to save the edited information.
1
4 5
2
3