Olympus OER-Elite - 4.5 User ID Setting

4.5 User ID Setting
83
OER-Elite OPERATION MANUAL
Ch.4
When this setting is activated, the user ID can be inputted in each process and the process cannot be
started without inputting User ID.
3 Press the “Save” button to save the selected setting.
4.5 User ID Setting
1 Select “User ID setting” on the Settings menu.
2 Select the function to change the user ID setting.
No. Button Description
1 Reprocessing Goes to the user ID Setting for “Reprocessing”.
oRefer to “ User ID setting (reprocessing)” on page 84.
2 Functions & Replacement
of Consumable Items
Goes to the user ID Setting for “Functions” and “Replacement of Consumable
Items”.
oRefer to “ User ID setting (functions and replacement)” on page 86.
3 Heat LCG Timer Goes to the user ID Setting for “Heat LCG Timer”.
oRefer to “ User ID setting (Heat LCG Timer)” on page 87.
4 Menu Returns to the Menu screen.
5 LCG Info. Open the disinfectant information screen.
6 Cancel Returns to the Setting menu.
1
2
3
4 5 6