110
4.19 Connection guide
OER-Elite OPERATION MANUAL
Ch.4
When this setting is activated, the connection guide screen is displayed after inputting scope ID with
RFID.
For details, refer to “ Connection guide of first endoscope” on page 179, or “ Connection guide of
second endoscope” on page 206.
4.19 Connection guide
1 Select “Connection Guide” on the Setting menu.
2 Select setting from options.
No. Item/Button Setting options Description
1 Connection Guide OFF Disable the Connection Guide screen.
ON (default) The Connection Guide screen appears automatically when scope
ID is entered.
2 Cancel – Returns to the Setting menu without saving the selected setting.
3 Save – Returns to the Setting menu after saving the selected setting.
The selected settings are displayed with white buttons.
3 Press the “Save” button to save the selected setting.
1
2 3
To Next Page
Loading...
