Olympus OER-Elite - User ID setting (Heat LCG Timer)

4.5 User ID Setting
87
OER-Elite OPERATION MANUAL
Ch.4

User ID setting (Heat LCG Timer)
When this setting is activated, user ID can be entered before starting “Heat LCG Timer” and recorded
in the reprocessing record.
1 Select setting from options.
No. Item/Button Setting options Description
1 User ID Setting
(Heat LCG Timer)
OFF Disable the user ID entry for “Heat LCG Timer”.
ON (default) Before starting “Heat LCG Timer” are entered the user ID.
2 Cancel – Returns to the Setting menu without saving the selected setting.
3 Save – Returns to the Setting menu after saving the selected setting.
NOTE
The selected settings are displayed with white buttons.
2 Press the “Save” button to save the selected setting.
1
2 3