4.14 Filter replacement indicator
99
OER-Elite OPERATION MANUAL
Ch.4
When this setting is activated, the reprocessor displays the filter replacement indicator when day
counts of each filter reach the set value. After reaching the set value, a pop-up message screen opens
soon after powering ON the reprocessor. When this setting is activated, the reprocessor counts the day
count (number of days of the each filter is effective after replacement) after each replacement of filters.
If the day counts reach the set value, both the message and the filter replacement indicator are
displayed on the touch screen.
• For details of indicator, refer to Section 3.2, “Alarm indicator”.
• When replace the consumable item after changing date and time, the filter
replacement indicator might not be displayed incorrectly.
4.14 Filter replacement indicator
1 Select “Filter Replacement Indicator” on the Setting menu.
2 Select each setting from options. To change the setting value, press “Edit” button.
To Next Page
Loading...
