4.24 Network security
121
OER-Elite OPERATION MANUAL
Ch.4
When this setting is activated, the network setting is protected with a password lock. The password
can be changed by editing the network security password in this setting.
When this setting is performed, the Network Settings are password-protected, and the screen of
password authentication is displayed as Section 4.23, “Network setting”.
4.24 Network security
1 Select “Network Security” on the Setting menu.
2 Edit the settings.
No. Item/Button Setting options Description
1 Network Security
Lock
OFF (default) Password is unnecessary to open the network setting.
ON Password is necessary to open the network setting.
oRefer to Section 4.23, “Network setting”.
2 “Edit” button
(Network Security
Lock)
– If the network security lock is OFF, press to activate it and edit the
new network security password.
If the network security lock is ON, press to inactivate it. In this
case, to input the network security password is necessary.
3 “Edit” button
(Network Security
Password)
– Press to change the password.
If the network security lock is OFF, the button turns gray and
becomes unavailable.
4 Cancel – Returns to the Setting menu without saving the edited information
5 Save – Returns to the Setting menu after saving the edited information.
3 To change the “Network Security Lock”, refer to the following sections:
“ Enabling the “Network Security Lock”” on page 122.
“ Disabling the “Network Security Lock”” on page 123.
To set a password, refer to “ Changing the password” on page 124.
4 After completing the editing, press the “Save” button to save the edited information.
1
4 5
2
3
To Next Page
Loading...
