Editing the setting of each item
The settings of the following items can be edited:
Reprocessor IP address
Reprocessor net mask
Reprocessor gateway
Reprocessor port number
Auto negotiation
COMM Settings
Timeout
1 Press the “Edit” button for the IP address, etc. to open the screen for use in input.
2 Enter the figures using the numeric buttons.
No. Button Description
1 Numeric buttons Press to enter the value.
2 m Moves the cursor to the right.
3 o Moves the cursor to the left.
4 Cancel Returns to the previous screen by disabling the edited settings.
5 OK Returns to the previous screen by enabling the edited settings.
While the settings are not changed, the “OK” button turns gray.
3 Confirm the edited information and press the “OK” button to return to the previous
screen.
1
4 5
2
3