Olympus OER-Elite - 4.4 Manual cleaning and leak test setting

82
4.4 Manual cleaning and leak test setting
OER-Elite OPERATION MANUAL
Ch.4
When this setting is activated, users can confirm if a manual cleaning and leak test have been
performed based on the scope ID. When the setting is On, those inputs are necessary. The manual
cleaning and leak test confirmations are linked to the scope ID's reprocessing records or leaking scope
decontamination records.
NOTE
The selected settings are displayed with white buttons.
3 Press the “Save” button to save the selected setting.
4.4 Manual cleaning and leak test setting
1 Select “Manual Cleaning and leak test Setting” on the settings menu.
2 Select setting from options.
No. Item/Button Setting options Description
1 Manual Cleaning
and leak test
Setting
OFF Disables the data entry for result of manual cleaning and leak test.
ON (default) Before starting “Reprocessing” and “Leaking Scope
Decontamination” are entered for each endoscope's result about
manual cleaning and leak test.
2 Cancel – Returns to the Setting menu without saving the selected setting.
3 Save – Returns to the Setting menu after saving the selected setting.
NOTE
The selected settings are displayed with white buttons.
1
2 3