Olympus OER-Elite - 4.10 Detergent replacement indicator

92
4.10 Detergent replacement indicator
OER-Elite OPERATION MANUAL
Ch.4
When this setting is activated, the reprocessor counts the day count (number of days the detergent is
effective after replacement) after each replacement of detergent and displays the detergent
replacement indicator when the day counts reach to the set value. After reaching to the set value, a
pop-up message screen opens prior to the start of reprocessing.
NOTE
• For details of the indicator, refer to Section 3.2, “Alarm indicator”.
• When replace the consumable item after changing date and time, the Detergent
replacement indicator might not be displayed incorrectly.
NOTE
The selected settings are displayed with white buttons.
4.10 Detergent replacement indicator
1 Select “Detergent Replacement Indicator” on the settings menu.
2 Select setting from options of the Detergent replacement indicator. To change the
setting value, press “Edit” button.
No. Item/Button Setting options Description
1 Detergent
replacement
indicator
OFF Disables the detergent replacement indicator.
ON (default) The reprocessor counts the day count (number of days the
detergent is effective after replacement) after each replacement of
detergent. And the detergent replacement indicator is displayed
when the day count is reached to the set value.
2 Edit – Goes to the screen for editing set value of day count.
3 Cancel – Returns to the Setting menu without saving the edited information.
4 Save – Returns to the Setting menu after saving the edited information.
1
3 4
2