Olympus OER-Elite - 4.23 Network setting

116
4.23 Network setting
OER-Elite OPERATION MANUAL
Ch.4
The communication parameters with external equipment can be set.
4.23 Network setting
1 On the Setting menu, select “Network”. If the “Network Security” setting is not
activated, go to Step 3 below. For details of “Network Security”, refer to Section 4.24,
“Network security”.
2 If the “Network Security” setting is activated, the password authentication screen
appears. Enter the password and press the “OK” button. If a wrong password is
entered, the entire password is cleared. In this case, re-enter the correct password.
No. Button Description
1 Numeric buttons Press to enter the value.
2 Delete Deletes one character.
3 Cancel Returns to the Setting menu without saving the edited information.
4 OK The input password will be checked.
When the password is correct, the network setting screen appears.
If the password is erroneous, the entire input password is cleared.
NOTE
If you forget the password, contact Olympus.
3 This setting consists of three pages. Switch the page using the next page button or
the previous page button, and edit the settings in each page.
1
3
2
4