Olympus OER-Elite - User ID setting (reprocessing)

84
4.5 User ID Setting
OER-Elite OPERATION MANUAL
Ch.4

User ID setting (reprocessing)
When this setting is activated, User ID can be entered before and/or after starting reprocessing
process and recorded in the reprocessing record.
1 Select the setting for user ID entry before beginning of reprocessing process.
No. Setting Options Description
1 OFF Disables the user ID entry before starting reprocessing process.
2 (A) ON One User ID can be input for two endoscopes before starting reprocessing
process.
3 (B) ON (default) User ID can be input for each endoscope before starting reprocessing process.
4 Cancel Returns to the previous screen.
5 Next Goes to the next setting.
NOTE
• The selected settings are displayed with white buttons.
• Only one User ID can be input at the end of reprocessing process.
• If the setting is activated, User ID input before beginning reprocessing process
cannot be skipped.
2 Press the “Next” button.
1 2 3
4 5