Olympus OER-Elite - Enabling the “Network Security Lock”

122
4.24 Network security
OER-Elite OPERATION MANUAL
Ch.4

Enabling the “Network Security Lock”
1 Press the “Edit” button for the network security
lock on the Network Security setting screen.
Figure 4.4
2 Enter the new password up to 10 numbers and press the “OK” button. The password
re-input screen appears.
No. Button Description
1 Numeric buttons Press to enter the value.
2 Delete Deletes one character entered immediately before.
3 Cancel Returns to the Setting menu without saving the edited information.
4 OK Returns to the previous screen if the entered password is correct.
All of the entered characters are cleared if the entered password is erroneous.
3 Enter the new password again and press the “OK” button. When the input password is
correct, the password is changed and the screen returns to the Network Security
setting screen.
1
3
2
4