4.16 Auxiliary water tube cleaning setting
105
OER-Elite OPERATION MANUAL
Ch.4
No. Item/Button Setting options Description
1 Auxiliary Water
Tube Cleaning
Setting
OFF (default) Disables the auxiliary water tube cleaning setting.
ON Auxiliary water tubes (MAJ-855 or MAJ-2021) can be reprocessed
simultaneously with endoscopes with water jet function by using
dedicated connecting tube MAJ-2138.
2 Cancel – Returns to the Setting menu without saving the selected setting.
3 Save/OK – When the “OFF” is selected, “Save” button is displayed here.
Press this button to return to the setting menu after saving the
selected setting.
When the “ON” is selected, “OK” button is displayed here. Press
this button to go to the confirmation screen about activating this
setting.
The selected settings are displayed with white buttons.
3 When “ON” was selected in the setting, this
confirmation screen is displayed. Read the
description and press the “Save” button to save
the setting.
Figure 4.3
1
2 3
To Next Page
Loading...
