10
Important Information — Please Read Before Use
OER-Elite OPERATION MANUAL
Precleaning
Cleaning of an endoscope performed after each procedure at the bedside in the
endoscopy room.
Procedure ID
Identity information specific to each procedure of the patient. It can be recorded in the
histories of reprocessing, etc. For the procedure ID input method, refer to Section 3.6,
“Entering ID”.
Process
Generic term for any operation, including cleaning and disinfection that is performed
automatically by this reprocessor.
Reprocessing process
A series of operations for ultrasonic cleaning, detergent cleaning, disinfection, rinse, air
purge, and alcohol flush of the outer surface or channels of endoscopes that run in a
specified sequence and for a specified time. Reprocessing programs [1] to [4] can be
selected by the user. Programs [1] to [4] have a fixed cleaning process time and
disinfection process time. They also have different patterns of auto leak test and channel
monitoring respectively.
Scope ID
Identity information specific to each endoscope. It can be recorded in the historical data of
reprocessing, etc. For the scope ID input method, refer to Section 3.6, “Entering ID”.
Shelf life
The date of expiration of the effectiveness of a detergent or disinfectant before it is
opened.
Test strip
Device used to test if the concentration of disinfectant solution is effective for disinfection.
Refer to Section 2.8, “Consumable accessories (Optional)” for details. (i.e., the minimum
recommended concentration (MRC) specified by the disinfectant manufacturer)
User ID
Identity information specific to each reprocessing operator. It can be recorded in the
histories of reprocessing, etc. For the user ID input method, refer to Section 3.6, “Entering
ID”.
To Next Page
Loading...
