18
Outline of Functions
OER-Elite OPERATION MANUAL
Rinse
This function performs the rinsing process if the fluid remains in the basin or in the endoscopes
after an irregularity occurs or the process is stopped midway. For details, refer to Section 7.5,
“Rinse”.
Leaking scope decontamination
This function decontaminates a leaking endoscope prior to repair. During the decontamination,
positive pressure is applied to the leaking endoscope to avoid fluid invasion and damage to the
endoscope. For details, refer to Section 7.15, “Leaking scope decontamination”.
ALT self-check
This function checks the auto leak test function of the reprocessor. It is performed automatically
at the end of Load LCG function or as an independent operation. For details, refer to
Section 7.13, “Self-check of auto leak test”.
To Next Page
Loading...
