• The Start Screen is set to “Menu screen” at the factory. For how to set the
Reprocessing Standby screen, refer to Section 4.18, “Start screen”.
• Before using the reprocessor, always show the confirmation information. Refer to
Figure 3.5.
Figure 3.5
2 The power indicator lights up and the touch
screen displays the initial screen for few
seconds.
Figure 3.3
3 The Start screen appears. Start screen will display the Menu screen or Reprocess
standby screen.
Figure 3.4
Initial screen
Menu screen Reprocessing Standby screen
To Next Page
Loading...
