Olympus OER-Elite - User or physician ID entry

3.6 Entering ID
47
OER-Elite OPERATION MANUAL
Ch.3

User or physician ID entry
NOTE
The user ID (load) and physician ID of second endoscope can be read after reading
the ID of second endoscope.
1 Press the “Reprocessing” button on the Menu screen.
2 Hold the user or physician ID card parallel with
the ID reader section and approach it until a
short beep is generated.
Figure 3.14
3 When the ID has been read, the following screen appears.
Figure 3.15
The information
on the input ID
is displayed.