EasyManua.ls Logo

Olympus OER-Elite - Page 1

Olympus OER-Elite
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76
4.1 Setting menu
OER-Elite OPERATION MANUAL
Ch.4
No. Button Description
1 Setting item button Press to display the buttons for starting various Functions.
Press the button for the desired function.
Page 1 Auto Leak Test
Setting
This setting sets the timing of auto leak test when it is included in the
reprocessing process.
oRefer to Section 4.2, “Auto leak test setting”.
MRC Check Setting When this setting is activated and the MRC check result is not input before
start of the following process, the reprocessor inhibits the start of the
following process and message screen is displayed.
oRefer to Section 4.3, “MRC check setting”.
Manual Cleaning
and Leak Test
Setting
When this setting is activated, the confirmation results of a manual cleaning
and the leak test before manual cleaning can be selected after the scope ID
input.
oRefer to Section 4.4, “Manual cleaning and leak test setting”.
Patient ID Security
Setting
When the setting is activated, patient data will not be exported or printed from
the OER-Elite. Even this setting is activated, data except the patient data can
be exported to the portable memory or printed.
oRefer to Section 4.8, “Patient ID security setting”.
User ID Setting When this setting is activated, the user ID can be input in each process.
oRefer to Section 4.5, “User ID Setting”.
Physician ID
Setting
When this setting is activated, the physician ID of the endoscope performing
the examination can be input before starting reprocessing process and
leaking scope decontamination and recorded in the reprocessing record.
oRefer to Section 4.6, “Physician ID setting”.
Patient ID Setting When this setting is activated, the ID of the patient receiving the endoscopic
examination can be input and recorded in the reprocessing records.
oRefer to Section 4.7, “Patient ID setting”.
Procedure ID
Setting
When this setting is activated, the procedure ID can be entered before
starting “Reprocessing”.
oRefer to Section 4.9, “Procedure ID setting”.
2 Menu button Press to go to the Menu.
3 Next page button Press to go to the next page. When there is no further page to go forward to,
the button turns gray and becomes unavailable.
1
2 3

Table of Contents

Other manuals for Olympus OER-Elite

Related product manuals