78
4.1 Setting menu
OER-Elite OPERATION MANUAL
Ch.4
No. Button Description
1 Page 3 Start Screen This setting sets the display that appears after the startup display at power
ON.
oRefer to Section 4.18, “Start screen”.
Connection Guide This setting sets the automatic display of the Connection Guide screen after
the Scope ID reading in the reprocessing program.
oRefer to Section 4.19, “Connection guide”.
Volume and
Brightness
This setting sets the volume of buzzer sound, etc., the brightness of the touch
screen and the panel press tone.
oRefer to Section 4.20, “Volume and brightness”.
Date and Time This setting sets the date display format and the clock of the reprocessor.
oRefer to Section 4.21, “Date and time”.
Temperature Scale This setting sets the scale used in the disinfectant solution temperature
display.
oRefer to Section 4.22, “Temperature scale”.
Network This setting sets the information required for connecting the reprocessor to a
Network.
oRefer to Section 4.23, “Network setting”.
Network Security This setting sets the security of the Network-related Settings.
oRefer to Section 4.24, “Network security”.
2 Menu button Press to go to the Menu.
3 LCG Info. button Press to open the LCG Info. display.
oRefer to Section 3.5, “LCG Info. screen”.
4 Previous page button Press to return to the previous. When there is no further page to turn back to,
the button turns gray and becomes unavailable.
1
2 3 4
To Next Page
Loading...
