Chapter 3 Installation and Connection
37
HIGH FLOW INSUFFLATION UNIT UHI-4
Figure 3.1
5. Connect the Light Source (CLV-190, CLV-S190).
Refer to Section 3.7, “Connecting the light source (CLV-190, CLV-S190) or the video system center
(OTV-S190)” on page 52.
(Connect it when used in combination)
6. Connect a power supply.
Refer to Section 3.8, “Connecting to an AC mains supply” on page 56.
7. Connect an insufflation tube and a suction tube.
Refer to Section 3.9, “Connecting the insufflation tube and suction tube” on page 58.
(Connect an insufflation tube when using the smoke evacuation function.)
To Next Page
Loading...
