Olympus UHI-4 - Inspection of the Cylinder Hose for (MAJ-1080;1081;1082;1985;1986); Inspection of the Medical Gas Pipeline Adapter (MAJ-1084;1085)

Chapter 4 Inspection
67
HIGH FLOW INSUFFLATION UNIT UHI-4
4.2 Inspection of the cylinder hose for
(MAJ-1080/1081/1082/1985/1986)
• If the cylinder hose is damaged, replace it with a new one.
• If the packing is damaged, replace it with a new one or
replace the cylinder hose with a new one.
• For information on how to replace the packing, refer to the
leaflet “Replacement procedure for packing (O-ring)”, which
is included with the cylinder hose for UHI-3 (MAJ-1080) or
the cylinder hose with switch over valve (PIN) (MAJ-1985).
1. Inspect the cylinder hose for scratches, cracks, or other damage.
2. Inspect the packing inside the yoke for scratches, cracks, or other damage.
Figure 4.2
4.3 Inspection of the medical gas pipeline adapter
(MAJ-1084/1085)
If the medical gas pipeline adapter or the hose for the
medical gas pipeline are damaged, replace them with a new
one.
Inspect the packing inside the yoke for scratches, cracks, or other damage.
Packing
yoke