Olympus UHI-4 - Page 83

Chapter 5 Operation
77
HIGH FLOW INSUFFLATION UNIT UHI-4
Figure 5.1
5. Selecting the smoke evaluation mode from three options of “OFF”, “Low”, and “High”.
 Refer to Section 5.6, “Selecting the smoke evacuation mode” on page 82.
6. Selecting the display mode.
 Refer to Section 5.7, “Selecting the display mode” on page 83.
7. Start insufflation.
 Refer to Section 5.8, “Insufflation” on page 85.
8. Start smoke evacuation.
• High-pressure hose
Refer to Section 5.9, “Smoke evacuation system/function” on page 86.
• Wall gas pipeline adapter
Refer to Section 5.10, “Automatic smoke evacuation system/function (when using the
electrosurgical generator or the ultrasonic generator)” on page 88.
9. Resetting the CO
2
volume indicator.
 Refer to Section 5.11, “Resetting the CO
2
volume indicator” on page 91.
10. Switch this instrument OFF and perform the steps after use.
 Refer to Section 5.12, “Steps after use” on page 92.