Omron CJ - INSTRUCTIONS - Page 242

3. Instructions
204
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Example Programming
When CIO 0.00 is OFF in the following example, the
instructions between JMP0(515) and JME0(516) are
processed as NOP(000) instructions and the outputs
maintain their previous status.
When CIO 0.00 is ON in the following example, the
instructions between JMP0(515) and JME0(516) are
executed normally.
CIO 0.00
ON
CIO 0.00
OFF
0.00
Instructions
processed
as
NOP(000).
(Outputs
remain
unchanged.)
Normal
execution