Omron CJ2M-CPU Series - Page 222

8 Pulse Outputs
8-62
CJ2M CPU Unit Pulse I/O Module User’s Manual
Pulse Output 0
CW Limit Input
Signal
A540.08 This is the CW limit input signal for pulse out-
put 0 to 3, which is used in the origin search.
To use this signal, write the input from the
actual sensor as an input condition in the lad-
der program and output the result to this flag.
Read/
Write
• Cleared when power is
turned ON.
Pulse Output 1
CW Limit Input
Signal
A541.08
Pulse Output 2
CW Limit Input
Signal
A542.08
Pulse Output 3
CW Limit Input
Signal
A543.08
Pulse Output 0
CCW Limit
Input Signal
Flag
A540.09 This is the CCW limit input signal for pulse out-
put 0 to 3, which is used in the origin search.
To use this signal, write the input from the
actual sensor as an input condition in the lad-
der program and output the result to this flag.
Read/
Write
Pulse Output 1
CCW Limit
Input Signal
Flag
A541.09
Pulse Output 2
CCW Limit
Input Signal
Flag
A542.09
Pulse Output 3
CCW Limit
Input Signal
Flag
A543.09
Pulse Output 0
Frequency
A10120
and
A10121
Contains the frequency of pulse output 0 to 3
when tracing pulse output 0 to 3 with data trac-
ing.
Valid only when the data tracing parameters
are set.
--- • Cleared when power is
turned ON.
Pulse Output 1
Frequency
A10122
and
A10123
Pulse Output 2
Frequency
A10124
and
A10125
Pulse Output 3
Frequency
A10126
and
A10127
Name Word/Bit Function
Read/
Write
Refresh timing