Omron CJ2M-CPU Series User Manual

31
CJ2M CPU Unit Pulse I/O Module User’s Manual
Related Manuals
Manuals related to a PLC built using a CJ-series CJ2 CPU Unit are listed in the following table. Use
these manuals for reference.
Manual Cat. No. Model Application Description
CJ-series CJ2M
CPU Unit Pulse I/O
Module User's Man-
ual (this manual)
W486 CJ2M-CPU@@
+
CJ2M-MD21@
Information on using pulse
I/O on CJ2M CPU Units
Provides the following information on the CJ2M
CPU Units:
• Specifications and wiring methods
• I/O functions
• Quick-response inputs
• Interrupt functions
• High-speed counters
• Pulse outputs
• PWM outputs
When programming, use this manual together
with the Instructions Reference Manual (Cat.
No. W474).
CJ-series CJ2 CPU
Unit Hardware
User’s Manual
W472 CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
Hardware specifications for
CJ2 CPU Units
Describes the following for CJ2 CPU Units:
• Overview and features
• Basic system configuration
• Part nomenclature and functions
• Mounting and setting procedure
• Remedies for errors
• Also refer to the Software User’s Manual
(W473).
CJ-series CJ2 CPU
Unit Software User’s
Manual
W473 CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
Software specifications for
CJ2 CPU Units
Describes the following for CJ2 CPU Units:
• CPU Unit operation
• Internal memory
• Programming
• Settings
• Functions built into the CPU Unit
Also refer to the Hardware User’s Manual
(W472)
EtherNet/IP Units
Operation Manual
W465 CJ2H-CPU6@-EIP
CJ2M-CPU@@
CS1W-EIP21
CJ1W-EIP21
Using the built-in Ether-
Net/IP port of the CJ2 CPU
Unit
Describes the built-in EtherNet/IP port and Eth-
erNet/IP Units.
Describes basic settings, tag data links, FINS
communications, and other functions.
CS/CJ/NSJ-series
Instructions Refer-
ence Manual
W474 CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
CS1G/H-CPU@@H
CS1G/H-CPU@@-V1
CJ1G/H-CPU@@H
CJ1G-CPU@@
CJ1M-CPU@@
NSJ@-@@@@(B)-G5D
NSJ@-@@@@(B)-M3D
Information on instructions Describes each programming instruction in
detail.
Also refer to the Software User’s Manual (W473)
when you do programming.

Omron CJ2M-CPU Series Specifications

General

Power Supply	24 VDC
Number of Instructions	Over 400 instructions
Model	CJ2M-CPU11, CJ2M-CPU12, CJ2M-CPU13, CJ2M-CPU14, CJ2M-CPU15
Program Capacity	5K steps to 60K steps
I/O Capacity	Up to 2, 560 points
Communication Ports	Ethernet, USB, RS-232C
Execution Time	0.04 µs per basic instruction
Operating Temperature	0 to 55°C
Position Control	Supported
High-speed Counter	100 kHz max.
Pulse Output	100 kHz max.
Maximum Units	40 units
Storage Temperature	-20 to 75°C
Interrupt Inputs	Supported