Omron MC4700 - Figure C-2 Pin Outs for Internal Screw Connectors Used Internally in the LCM-2 XX; Figure C-3 Pin Outs for Micro_Style Connectors

Network Connector
(Female Contacts)
5 – V+ (White)
4 – CAN-H (Black)
3 – Drain (Brown)
2 – CAN-L (Gray)
1 V- (Blue)
Device Connector
(Male Contacts)
5 4 3 2 1
. . . . .
OMRON SCIENTIFIC TECHNOLOGIES INC.
Fremont CA USA
Tel: 1/888/510-4357 in USA and Canada
© OSTI 1209 PN99584-0050 Rev. E
Original Instructions
96
Figure C-2 Pin Outs for Internal Screw Connectors used internally in the LCM-2XX
C.4.2 M-12 MICRO_STYLE CONNECTOR FOR LCM-2XX SERIES
The Nema box controllers offer an optional M-12 micro-style connector for external connection to a
DeviceNet Network with the following pin out definition.
The micro_style connectors (Fig 2, internal colors correspond to the M12 connector used on the LCM-
2XX series controller).
1.Drain (brown)
2.V+ (white)
3.V_ (blue)
4.CAN_High (black)
5.CAN_Low (gray)
1 – Drain (Brown)
2 – V+ (White)
3 – V– (Blue)
4 – CAN-H (Black)
5 – CAN-L (Gray)
1
5
4
3
2
Figure C-3 Pin Outs for Micro_Style Connectors
Note : Device-Net requires that connectors on devices must have male contacts.