Onity HT22 - Deleting a Back-Up

Maintenance Functions - 96
MAKE BACK-UP
02 Encoder #2 ok
03 Encoder #3 old
04 Encoder #4
05 Encoder #5
CLR : Clear Back-up
6. Press the ENTER key. The screen will display a
counter in the lower right hand corner as it performs
the back-up.
MAKE BACK-UP
02 Encoder #2 ok
03 Encoder #3 old
04 Encoder #4
05 Encoder #5
Making Back-up………2012
7. When the unit has completed the operation, the
counter will disappear, and the status of all back-ups
will be updated. When you have finished performing
the back-ups, press the MENU key to select another
function, or press the EXIT key to log out of the
system.
Deleting a Back-up
To delete a back-up, perform the following steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.
3. Press the RIGHT ARROW key five times to enter the
Maintenance menu.
4. Press the DOWN ARROW key one time to select
Make Back-up.
5. Press the ENTER key. The screen will display a list
of the secondary encoder addresses, and the status of
any current back-ups, if any exist. Use the UP and
DOWN ARROW keys to select a secondary encoder.