Management / Security Functions - 87
Language
This function is used to select the language that the unit
will use to interface with the operators. The HT22 can
have up to eight different language files stored in the
unit.
To change the language the unit is using, perform the
following steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.
3. Press the RIGHT ARROW key four times to enter
the Configurations menu.
4. Press the DOWN ARROW key once to select
Language.
5. Press the ENTER key. The screen will enter the
language selection list. Use the UP and DOWN
ARROW keys to select the language you wish to use.
LANGUAGE
English (US)
French
German
S
anish
6. Press the ENTER key. The unit will return to the
main menu in the language you have selected. Select
another function, or press the EXIT key to log out of
the system.
Check-Out Warning
This function is used to activate or deactivate the
Check-Out Warning feature in the system. The Check-
Out Warning will warn the operator when the system
shows that the selected room is still occupied. The
operator should verify that the room is indeed available
prior to continuing with the check-in.
To Next Page
Loading...