Onity HT22 - Updating a Peripheral

Maintenance Functions - 103
PERIPHERALS
Xe 01 Built-in reader
Xe 02 Encoder #2
Xe 03 Encoder #3
04 Parking
Press HELP for info.
9. When you have finished initializing peripherals, press
the MENU key to select another function, or press
the EXIT key to log out of the system.
Updating a Peripheral
This function is used to transfer the current console data
into an on-line reader or identifier.
To update an on-line card reader or identifier, perform
the following steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.
3. Press the RIGHT ARROW key six times to enter the
Communication menu.
4. Press the DOWN ARROW key once to select
Peripherals.
5. Press the ENTER key. The screen will display a list
of the system peripherals and their current status.
PERIPHERALS
Xe 01 Built-in reader
Xe 02 Encoder #2
Xe 03 Encoder #3
X 04 Parking
Press HELP for info.
6. Press the 2 key. The screen will prompt you to select
the peripheral to be initialized from a list of all