Onity HT22 - Making a Copy of a Guest Card

Using the HT22 System - 30
10. If more than one card was requested, the screen will
repeat the prompts until all of the requested cards are
made. When you are finished making cards, press the
MENU key to select another function, or press the
EXIT key to log out of the system.
Making a Copy of a Guest Card
WARNING: Never make a
copy of a Guest Card if the
guest has LOST their card.
Make a NEW GUEST CARD
to void out a lost card. Inform
the guest that all members of
his or her party will require
updated copies.
This function is used to encode extra cards for an
occupied guestroom after the initial check-in procedure.
These cards will not affect the use of the current Guest
Card.
To encode a copy of a Guest Card, perform the
following steps:
1. Enter your password and press the ENTER key.
You may select room numbers
f
rom a list by pressing the
HELP key.
2. Press the COPY GUEST key. The screen will prompt
you to enter the room number for the new copy.
COPY GUEST CARD
Room: 101
3. Enter the room number and press the ENTER key. If
this property offers optional authorizations for the use
of an amenity, such as the use of a room safe, you
will be prompted to either authorize or deny the use
of these items.