System Components - 3
System Components
Locks
The HT24 lock is a stand alone magnetic stripe lock
that runs on 4 AA alkaline batteries. The most
important feature of the electronic lock is that it
changes its code automatically for each new guest who
checks into the room. Each new Guest Card used in a
lock will automatically void the previous Guest Card.
In a similar manner, the lock will also accept a new
master card. Any new Master Card used in a lock will
automatically void the previous Master Card.
Keycards
The system uses an ISO standard three-track, low-
coercivity, flush-mount magnetic stripe keycard. The
card complies with the ISO requirements for keycard
dimensions and materials. The information is encoded
on track three in an encrypted and proprietary format,
leaving tracks one and two open for use in another
system, such as a point-of-sale system.
Advance RFID uses MIFARE-compliant ISO
standards-based ultra light or 1K keycard.
To Next Page
Loading...