Onity HT22 - Multiple Room Guest Card

Using the HT22 System - 26
9. Press the ENTER key. The display will prompt you
to insert and withdraw the card.
NEW GUEST CHECK IN
Room: 101
S
14:00 11/26/98
Insert Card #1
NEW GUEST CHECK IN
Room: 101
S
14:00 11/26/98
Withdraw Card
10. If more than one card was requested, the screen will
repeat the prompts until all of the requested cards are
made. When you are finished making cards, press the
MENU key to select another function, or press the
EXIT key to log out of the system.
Multiple Room Guest Card
The new guest function of the HT22 allows you to
make Guest Cards that will work in up to three
guestroom doors. As an example, if a family checked
into the hotel, and the parents requested one room for
themselves and two more rooms for the children, the
cards can be made to work in all three locks. To check
in a new guest and allow access to multiple rooms,
perform the following steps:
1. Enter your password.
2. Press the ENTER key. If a back-up needs to be
made or updated, the screen will prompt you to
take action. Once this process is complete, the