Onity HT22 - Changing the Operating Mode of a Workstation

Maintenance Functions - 104
system peripherals. Use the UP and DOWN ARROW
keys to select the peripheral you wish to update.
INITIALIZE
04 Parking
05 Fitness
06 Front Door
07 Rear Doo
r
7. Press the ENTER key. The peripheral will be
updated, and the screen will return to the list of
peripherals.
8. When you have finished updating peripherals, press
the MENU key to select another function, or press
the EXIT key to log out of the system.
Changing the Operating Mode of a Workstation
This function is used to change the operational mode of
the HT22 workstation encoders between Regular
Encoder mode and Terminal Encoder mode. This is
useful in a system controlled by a PMS interface. If the
PMS interface is down, the hotel may change the
encoders to Terminal Encoder mode, and continue to
rent rooms and make cards on the workstation encoders
until the PMS is back on-line. Then they simply change
back to the Regular Encoder mode to operate with the
PMS.
To change the operating mode of a workstation,
perform the following steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.
3. Press the RIGHT ARROW key six times to enter the
Communication menu.
4. Press the DOWN ARROW key once to select
Peripherals.