System Components - 10
Spare Card System
The Spare Card system is used as an emergency back-
up to maintain the hotel’s ability to rent rooms in the
event of an extended power outage or complete system
failure. It is extremely important to keep a current
Programming Card with the Spare Cards at all times.
These cards should be located in a secure area where
they are easily accessible to the front desk staff in the
event of an emergency. Since the locks are battery
operated, current Guest Cards are not affected by these
issues.
Printer
A standard parallel printer is used to print the reports
from the HT22 main station. Onity supplies an ink jet
printer to perform these functions.
To Next Page
Loading...