Onity HT22 - Single Opening Card

Using the HT22 System - 33
when a new guest is checked into the room. Also, the
key will be disabled in any online exit doors.
Single Opening Card
This function is used to make a card that will work in a
guestroom lock only once. The Single Opening Card is
commonly used by the hotelier to allow a guest to
preview a room, or to allow a vendor to place an item
inside of a room. Once the card is used in the lock, it is
no longer valid. A maximum of four Single Opening
Cards may be made for a single guestroom between
new guest check-ins.
To make a Single Opening Card, perform the following
steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.
3. Press the DOWN ARROW key three times to select
Single Opening Card.
You may select room numbers
f
rom a list by pressing the
HELP key.
4. Press the ENTER key. The screen will prompt you to
enter the room number for the Single Opening Card
you wish to make.
SINGLE OPENING CARD
Room: _
5. Enter the room number and press the ENTER key. If
this property offers optional authorizations for the use
of an amenity, such as the use of an in-room safe, you
will be prompted to either authorize or deny the use
of these items. Press the CLR key to say no or press
the ENTER key to authorize the use of each amenity.