Maintenance Functions - 112
1. Plug the PP into the lock.
2. Press the ON/CLR key to turn on the PP.
3. Press the MENU key until UPDATE appears.
4. Press the UP or DOWN arrow key to select the
desired room. (see note below)
5. Press the green TX key.
6. Unplug the PP when it is finished.
NOTE: It is not necessary to use the arrow keys to
scroll to the correct room number when updating a
lock. You will find that you cannot update a lock to the
wrong room number. The PP is intelligent in that it
"knows" what lock it is plugged into and will only
update THAT lock. You will also notice that if you have
to update several locks, the room numbers disappear
from the list in the PP as they are updated. This feature
is particularly useful during a time change because you
can quickly see if you have missed any locks when you
intended to update ALL the locks on your property.
Read Openings
The lock contains an audit trail of the last 100 openings.
To view this audit trail, you must use the READ
OPENINGS function of the PP.
To read a lock, follow these steps:
1. Go to the desired door and connect the PP.
2. Turn the PP on and select READ OPENINGS by
pressing the MENU key.
3. Press the green TX key.
4. Unplug the PP and take it to the front desk console.
5. Refer to the section on LOCKS AUDIT TRAIL on
page 80 to print this report.
To Next Page
Loading...