Onity HT22 - System Security and Auditing

Management / Security Functions - 65
To encode Spare Cards, perform the following steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.
3. Press the RIGHT ARROW key twice to enter the
Special Cards menu.
4. Press the DOWN ARROW key four times to select
Spare Cards.
5. Press the ENTER key. The screen will prompt you to
enter the number of Spare Cards you wish to encode.
The maximum number that you may enter is 99. Use
the number keys to enter the number of cards you
need.
SPARE CARDS
Number of cards: 1
6. Press the ENTER key. The screen will prompt you to
insert and withdraw the card. This will be repeated
for each of the Spare Cards you requested.
7. The screen will return to the main menu. You may
select another function, or press the EXIT key to log
out of the system.
Security Functions
Menu Overview / Refresher
The functions pertaining to system operators and
auditing capabilities are contained in the Security
Menu. This is the fourth of the seven menus. This menu
can only be accessed from the Main Encoder.