Onity HT22 - Auto Log-Off Time

Management / Security Functions - 88
To turn this feature on or off, perform the following
steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.
3. Press the RIGHT ARROW key four times to enter
the Configurations menu.
4. Press the DOWN ARROW key twice to select
Check-out Warning.
5. Press the ENTER key. The unit will prompt you to
turn the function on or off.
Check-out Warning?
ENTER=Yes CLR=No
6. Press the ENTER key to enable this feature, or press
the CLR key to disable this feature. The unit will
return to the main menu. You may select another
function, or press the EXIT key to log out of the
system.
Auto Log-off Time
This function is used to activate and set the amount of
time before the unit will automatically log-out an
inactive user. The benefit of this feature is that if a user
forgets to log out of the system, someone cannot use the
previous user’s log-in to perform operations on the
console.
To adjust the settings for this feature, perform the
following steps:
1. Enter your password and press the ENTER key.
2. Press the MENU key.