Maintenance Functions - 105
5. Press the ENTER key. The screen will display a list
of the system peripherals and their current status.
PERIPHERALS
Xe 01 Built-in reader
Xe 02 Encoder #2
Xe 03 Encoder #3
X 04 Parking
Press HELP for info.
6. Press the 3 key. The screen will prompt you to select
the encoder to be changed from a list of all system
peripherals. (Remember, you may press the HELP
key of a list of options available from this screen.)
Use the UP and DOWN ARROW keys to select the
encoder you wish to change.
INITIALIZE
01 Built-in reader
02 Encoder #2
03 Encoder #3
08 Encoder #4
7. Press the ENTER key. The encoder will change
modes, and the screen will return to the list of
peripherals. The status of the device will be updated
to reflect the change.
PERIPHERALS
Xe 01 Built-in reader
Xt 02 Encoder #2
Xe 03 Encoder #3
X 04 Parking
Press HELP for info.
To Next Page
Loading...