Maintenance Functions - 102
Only one unit may be
initialized at a time.
1. Prepare one unit to be initialized. Consult your unit’s
technical manual for instructions on proper wiring and
preparations for initialization.
2. Enter your password and press the ENTER key.
3. Press the MENU key.
4. Press the RIGHT ARROW key six times to enter the
Communication menu.
5. Press the DOWN ARROW key once to select
Peripherals.
6. Press the ENTER key. The screen will display a list
of the system peripherals, and their current status. If
the device is properly prepared, the screen will
display “One Perif. asking Ini”.
PERIPHERALS
Xe 01 Built-in reader
Xe 02 Encoder #2
03 Encoder #3
04 Parking
One Perif. Asking Ini.
Press HELP for info.
7. Press the 1 key. The screen will prompt you to select
the peripheral to be initialized from a list of all
system peripherals. Use the UP and DOWN ARROW
keys to select the peripheral you wish to initialize.
INITIALIZE
02 Encoder #2
03 Encoder #3
04 Parking
05 Fitness
8. Press the ENTER key. The peripheral will be
initialized, and the screen will return to the list of
peripherals. The status of the device will be updated
to reflect the change.
To Next Page
Loading...