Management / Security Functions - 74
2. Press the MENU key.
3. Press the RIGHT ARROW key three times to enter
the Security menu.
4. Press the DOWN ARROW key once to select
Auditor.
5. Press the ENTER key. The screen will display a list
of choices as to what operator information should be
included in the report.
All operators
One operator
TESA Service
PMS
6. Use the UP and DOWN ARROW keys to select what
operator data to include, and press the ENTER key.
7. If you selected "One Operator" in step 6, the screen
will display a list of the system operators. Use the UP
and DOWN ARROW keys to select which operator's
transaction you would like to see, and press the
ENTER key.
SELECT OPERATOR
001 Aitor Agueda
002 Alan North
003 Julia Vila
004 Paul Love
005 June Nydell
006 Inigo Rosas
8. The screen will prompt you to enter a starting date
and time for the transactions, or press the CLR key to
get all of the transactions, regardless of the date and
time. If you wish to limit the report, use the LEFT
and RIGHT ARROW keys to select the date and time
fields, and use the number keys to enter new values,
then press the ENTER key to accept those values.
To Next Page
Loading...