OpenEye OE3-E48016 - Creating a Recorder Connection with Remote Software; Default Remote Software Log in Information

74
Creating a Recorder Connection with Remote Software
1. Install the Remote Software on a PC using the disc provided with your recorder.
2. Open the Remote Software. The Local Setup window will open automatically.
3. Click New.
4. Select OE3-E240 or OE3-E480 as the Site Type.
5. Enter a name for the system in the Site Name box.
6. Enter the IP address of the recorder - found in NETWORK > NETWORK SETUP on the
recorder.
7. Enter the Port number found in NETWORK > NETWORK SETUP on the recorder
(default is 2000).
8. Click OK.
9. Enter the user name and password of an authorized user as defined in SYSTEM >
USER SETUP on the recorder.
Note User Name and Password are both case sensitive.
10. Click Connect.
Default Remote Software Log in Information
The default administrative log in information for the remote software:
User Name: admin
Password: <none>